These instructions are different if you are using a non-Slingshot supplied modem.

You'll need to ensure that your home network is correctly plugged in, and that both your modem & computer are on. Here is some more information on how to set up your home network.

If you have your home network all setup and want to access your routers configuration menu check which router you have in the below images and note down the Default gateway number, username and the password, the MAC address of the router will be located on the bottom or the back of the Router.

• If this fails try Username: admin Password: admin
• No joy, then preform a factory reset
• Step to access the router/modem GUI window
• Open an Internet browser window on your computer
• Type the default gateway in the address bar, example below

• You’ll be prompted with a username and password screen, see below

• Enter the username and password and from there you should see the configuration menu of the router, if this isn’t showing try a factory reset of the router.