These step-by-step instructions will assist you in setting up and connecting your Netcomm NB604N modem to your ADSL broadband connection.
We've made it super easy to set up. Just follow the numbered steps below and you'll be good to go!
Modem Setup
1. Plug the black cable to wall socket and the other end into the grey DSL port on the modem. If you have homeline services, use the DSL Filter.
2. Plug the power pack into your power point and modem and turn the modem on, using the (ON/OFF) button.
3. Plug the yellow Ethernet cable into your device (e.g. PC, TV or game console).
You should be up and running in a few minutes. Boom!
You can find your Wi-Fi network name and password by logging into your NB604N modem at 192.169.1.1. Check out setting up wireless on NB604N for step by step instructions.
Cables
Telephone cable (RJ-11): This cable runs from the DSL port of your modem to your dedicated wall socket.
Ethernet cable (RJ-45): This cable runs from the Ethernet/LAN port of your modem to the Ethernet plug on your computer device.
Was this article helpful?