These instructions will guide you through connecting your NETGEAR Orbi Wi-Fi 6 router to the internet. Looking for instructions to set up extra Orbi satellites instead? We've got you.
It's super easy to set up, so let's get started!
Step 1: Get the Orbi app
Download the Orbi app on your mobile device. It's available on the App Store and Google Play.
Using the App to set up the Orbi is essential to getting you online.
Step 2: Connect your Orbi router
- Connect the Ethernet cable to your Orbi’s Internet port, then connect the other end to the port labelled LAN1 or GE1 on your Optical Network Terminal – that’s the fibre box usually found on your wall.
- Connect the power adapter and turn your Orbi on at the wall.
If you have a landline, connect it to the port labelled POTS or TEL on your Optical Network Terminal.
Step 3: Connect to your Orbi Wi-Fi network
- Go to the Wi-Fi settings on your mobile device.
- Connect to your Orbi Wi-Fi network. You’ll find the Wi-Fi network name and password printed on the front of your Orbi router.
It may take a few minutes for your network to appear after plugging in your Orbi.
Step 4: Complete setup in the Orbi app
Open the Orbi app and follow the setup instructions. There are several different checks that you will need to go through to finish setting it up.
Important: Skip the steps instructing you to disconnect and reconnect your ISP modem. These steps don’t apply – just select ‘Continue’.
That's it, your Orbi router is up and running!
Optional: Change Wi-Fi Name and Password
You can manage your Wi-Fi name and password through WiFi Settings in the Orbi App. Here you can change the Name (SSID) and Main WiFi Password. Once updated just click Save and you're good to go!
Was this article helpful?